🛠️ What Have You Done To Your LC250 Today?

Looks good. What light and brackets? Or better yet, got an install thread? 😀
The lights are Rigid 360 4” Amber.
Bracket are for an F150 -$16 on Amazon
2 - M6 1.00 x 40 mm Black stainless bolts
4 - black stainless m6 washers
2 - 1/2” ID 3/4” bronze Flange Bearing



Install took me about 2 hours which included wiring the lights in to my Garmin Switch.

Total cost less the lights was about $30.

They are very sturdy. If you ever want to take them off and install Nashfabs solution or something the brackets can come off and just screw the bolt back in with the black washer and you’ll never know it was there.
 
The lights are Rigid 360 4” Amber.
Bracket are for an F150 -$16 on Amazon
2 - M6 1.00 x 40 mm Black stainless bolts
4 - black stainless m6 washers
2 - 1/2” ID 3/4” bronze Flange Bearing



Install took me about 2 hours which included wiring the lights in to my Garmin Switch.

Total cost less the lights was about $30.

They are very sturdy. If you ever want to take them off and install Nashfabs solution or something the brackets can come off and just screw the bolt back in with the black washer and you’ll never know it was there.

Great info! Thanks.
 
Upgraded the interior mediocre vanity and rear LED lights. Ordered from Japan. Was not easy to install with instructions in Japanese. Thought they had sent me the wrong product and about to give up when I figured out I had to remove some pieces of the original LED lights.
 

Attachments

  • 20241116_160556.jpg
    20241116_160556.jpg
    123.1 KB · Views: 204
  • 20241116_162817.jpg
    20241116_162817.jpg
    151.2 KB · Views: 165
  • 20241116_162952.jpg
    20241116_162952.jpg
    268.9 KB · Views: 143
  • 20241116_160611.jpg
    20241116_160611.jpg
    369.8 KB · Views: 147
Upgraded the interior mediocre vanity and rear LED lights. Ordered from Japan. Was not easy to install with instructions in Japanese. Thought they had sent me the wrong product and about to give up when I figured out I had to remove some pieces of the original LED lights.
I like... link?
 
I would see these back rest protectors and matching cargo trays at Canadian dealerships promoting the LC250 on YouTube. Found out they are specific only to the Canadian market. Tried to order some but they would not ship to the US. So I flew there, bought a set and checked them as luggage. I love that you have easy access to the hidden compartments.
Have this in mine, love it!
 
Very nice! Would you mind sharing more photos of the overlanding gear and camp setup?
Happy too! The trailer is a Turtleback Getaway, I post some images of the setup
-22 gallon water tank
-2 marine grade batteries (5-7 days off grid power)
-Solar panel inputs
-King size mattress in rooftop tent
-instant hot water heater
-33” offraod tires
-dual independent suspension, no cross axle
 

Attachments

  • IMG_2943.jpeg
    IMG_2943.jpeg
    427.6 KB · Views: 108
  • IMG_2144.jpeg
    IMG_2144.jpeg
    422.2 KB · Views: 93
  • 43A3B942-D115-49BD-B074-58BE9F719704.jpeg
    43A3B942-D115-49BD-B074-58BE9F719704.jpeg
    523.4 KB · Views: 90
  • IMG_1196.jpeg
    IMG_1196.jpeg
    446.9 KB · Views: 89
  • D94EDC9B-2491-4AB9-B503-F891FEC53E40.jpeg
    D94EDC9B-2491-4AB9-B503-F891FEC53E40.jpeg
    444.7 KB · Views: 150
Attached photos are parts of my setups for Overlanding. Some of them were shared in my other posts which you can search for them if you like.

Soon, I will share the completed/entire setups with:
• Rooftop tent (Ikamper mini)
• Hitch-mount spare tire carrier: 33” OK3 tire, extra fuel+water, recovery boards Maxtrax, license plate with light, etc.
• Side panels with extra fuel / water + shovel/ etc.
• All AC lights: rock lights, bumper light bar, ditch lights, front roof spot lights, side lights, chasing lights
• Control panel / switch panel for all AC lights
• ARB side awning
• ARB built-in air compressor
• Drawer system , fridge slider

As a designer and off-road / off-grid camping person, I utilized all available stuffs to customize for my taste / uses.
I learned and did those over years with my Gwagon for same purposes above without much after marker gears manufactured for it. (See my gwagon photos for my previous custom works)
 

Attachments

  • IMG_7853.jpeg
    IMG_7853.jpeg
    413.4 KB · Views: 151
  • IMG_7855.jpeg
    IMG_7855.jpeg
    835.5 KB · Views: 149
  • IMG_5872.jpeg
    IMG_5872.jpeg
    601.3 KB · Views: 143
  • Snapseed.jpeg
    Snapseed.jpeg
    378.3 KB · Views: 149
Last edited:
Attached photos are parts of my setups for Overlanding. Some of them were shared in my other posts which you can search for them if you like.

Soon, I will share the completed/entire setups with:
• Rooftop tent (Ikamper mini)
• Hitch-mount spare tire carrier: 33” OK3 tire, extra fuel+water, recovery boards Maxtrax, license plate with light, etc.
• Side panels with extra fuel / water + shovel/ etc.
• All AC lights: rock lights, bumper light bar, ditch lights, front roof spot lights, side lights, chasing lights
• Control panel / switch panel for all AC lights
• ARB side awning
• ARB built-in air compressor
• Drawer system , fridge slider

As a designer and off-road / off-grid camping person, I utilized all available stuffs to customize for my taste / uses.
I learned and did those over years with my Gwagon for same purposes above without much after marker gears manufactured for it. (See my gwagon photos for my previous custom works)
I dig the molle racks over the exterior rear windows.
 
Back
Top