You are correct. Found out when it arrived at home...This is the wrong transfer skid. Need the one that ends in 41, not 44. 41 is shorter and fits the Taco only.
I removed the link to avoid future confusion.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You are correct. Found out when it arrived at home...This is the wrong transfer skid. Need the one that ends in 41, not 44. 41 is shorter and fits the Taco only.
Mine had had a hardware bag in it.Should I have received a hardware bag?
I may make mine available. I'm holding off until I can make the design to, hopefully, work with the GX.Kind of an aside for this thread, but since we got on the Tacoma side of things, does anyone know if the burlier ~1/4" aluminum '24 Tacoma TRD Pro (front) skid will work on the LC?
I was able to take the u-bolts from the oem old plastic skid. The small access panel had 3x u-nuts. Consequently, I needed to use m8 bolts from these locations to mount the trim piece to the new steel skid plate, instead of the spec’d m6 + u-nuts. Its over built now but works.Yes a hardware bag with black bolts that are smaller than those that came out of the stock vehicle (I did not use any of them), and the two u-nuts for the trim piece. Bummer, but all you really need is the slide-on u-nuts.