I-FORCE MAX Badge

[lcgeek]

Mine was sitting in the 109 degree AZ sun all day too..

 

[landcruiserc]

Got rid of mine too. Looks 100x better.

Don't even need the floss. Just let it sit in the sun, then pull off.

 

[EOD Guy]

I had a similar issue with the yellow micro fiber cloths. I was using one with some acetone to remove some stains from white plastic sign board and the dye transferred onto the plastic and a hint of it remains there forever!

 

[Alpha Puppy]

Mine came right off, I didn't even need alcohol. Just balled right off.

 

[pdizzle]

To black it out you will need to remove it.

Get yourself some waxed dental floss, and carefully remove the badge with the dental floss.

Then clean the paint with an adhesive remover like Goof-Off.

Next take your iForceMax badge and chuck it in the trash because it’s an abomination. Or put it in a zip lock baggie if you simply must save it.

Mail it back to Toyota

 

[bygmomma88]

I removed mine with fishing line as recommended, used goo gone for the residue with grey microfiber towel. It left a shadow almost as if light never touched the paint before they stuck the emblem on. Now I have to decide if I replace it, leave it, or put the badge back on.

 

[lcgeek]

I removed mine with fishing line as recommended, used goo gone for the residue with grey microfiber towel. It left a shadow almost as if light never touched the paint before they stuck the emblem on. Now I have to decide if I replace it, leave it, or put the badge back on.

Got a good pic?

 

[bluebullet]

I removed mine with fishing line as recommended, used goo gone for the residue with grey microfiber towel. It left a shadow almost as if light never touched the paint before they stuck the emblem on. Now I have to decide if I replace it, leave it, or put the badge back on.

Put it back on. It will look good for years to come...

 

[EOD Guy]

My bet is that It'll weather out in a few months.

 

[bygmomma88]

Got a good pic?

Not at the moment. I’ll take one tomorrow.

 

[batchelor22]

Just took mine off today, don’t see any marks left.

 

[bygmomma88]

Got a good pic?

It is right above the crease

 

[lcgeek]

I would suggest first trying an orbital polisher and some quality polishing compound.

 

[EOD Guy]

Use some high quality glazing compound like 3M and just a microfiber cloth, should buff right out with just hand power.

 

[bygmomma88]

Use some high quality glazing compound like 3M and just a microfiber cloth, should buff right out with just hand power.

When you say glazing compound, do you mean something like this?

Amazon.com

 

[navindralr]

I would recommend meguiars 105 followed by 205. probably the best stuff that you can get easily in a store.

 

[bygmomma88]

I would recommend meguiars 105 followed by 205. probably the best stuff that you can get easily in a store.

Thanks!

 

[EOD Guy]

When you say glazing compound, do you mean something like this?

Amazon.com

This is what I use....