im just OCD like that. I'm still annoyed that my Tundra didnt come with a matching spare
Tire Upgrade ?
- Thread starter JPATTERS
- Start date
I went with different wheels because my wife did not like the stock ones!
No idea.
ko3’s.
Seems totally fine. Not harsher if anything maybe a tad softer.
I've another couple hundred miles on it. About 50 of those were on forest service roads. I don't find the road manners more harsh, the height between 245 to 275 is definitely noticeable. It may be a bit more sluggish, but not significantly. The mileage is pretty terrible before and after the new tires in my opinion. The best I've gotten on a ~10 mile trip is 22mpg according to the computer. I saw that the tires would throw off the mph and computer by 1.054. If I'm doing the math correctly, my best trip would be adjusted to just over 23mpg.
Here it is
Icon Alloy Recon SLX 18x9 +40 offset
Falken Wildpeak AT4W: load range C, 285/70/r18 33.7 or Falken claims 34”
I took it over into the desert by my house and tried to get some rub but never felt or heard anything. Here are some quick photos I grabbed but I would say, success!
Icon Alloy Recon SLX 18x9 +40 offset
Falken Wildpeak AT4W: load range C, 285/70/r18 33.7 or Falken claims 34”
I took it over into the desert by my house and tried to get some rub but never felt or heard anything. Here are some quick photos I grabbed but I would say, success!
Attachments
My LC has OEM 245/70/18 tires. I am considering 265/70/18 Nito Rridge Grapplers and my question will these work with my stock LC?
Looks like a 7” wheel is an acceptable width for those, and 33” shouldn’t be too tall so I’m thinking you are in good shape
My FE came with Nitto Ridge Grapplers 265/70/18. Apparently Southeastern Toyota is installing these at port.
Last edited:
Interesting, just picked up a 1958 with 265/65/18 that went through SET. Would have liked the 265/70/18. Maybe FE vs 1958
No my FE came with 265/70/18 Michelin trail pitiful excuse for all terrain tire . Switched to Falken AT4Interesting, just picked up a 1958 with 265/65/18 that went through SET. Would have liked the 265/70/18. Maybe FE vs 1958
question for @Dragoon - did you need to use different lug nuts for this install? I'm trying to get everything sorted ahead of time before my LC shows up ... thanks for any info you have
It isn't his vehicle
I already asked him about it. The thread pitch and length of the studs on the Land Cruiser is identical to the Tundra/Sequoia. You can use your OEM lug nuts with no problem.
perfect, thank you for the infoIt isn't his vehicle
The thread pitch and length of the studs on the Land Cruiser is identical to the Tundra/Sequoia. You can use your OEM lug nuts with no problem.
Multiple fittings, Ended up with 275 70 18 falcons at4 on my stock 1958 wheels. Fits great .
Extra ready for the LC to arrive today
