🛠️ Member Build Underground

[GrahamM32]

Just picked up the Cruiser. Installing the Westcott pre load collars on Friday. More pics to follow.

 

[hosscat]

Just picked up the Cruiser. Installing the Westcott pre load collars on Friday. More pics to follow.


View attachment 7084View attachment 7085

Nice. I have the exact same truck.
Those the 265/70r18 Nittos?
Which collars? I believe the front/back kit for the '24 LC is 6-8 weeks out.

 

[LCBob]

Nice. I have the exact same truck.
Those the 265/70r18 Nittos?
Which collars? I believe the front/back kit for the '24 LC is 6-8 weeks out.

Placed my order with Westcott on July 8th and they were delivered on July 31st so I think they’re being very conservative on delivery estimates.

 

[GrahamM32]

Nice. I have the exact same truck.
Those the 265/70r18 Nittos?
Which collars? I believe the front/back kit for the '24 LC is 6-8 weeks out.

These are the 35X12.5R-17 TOYO OPEN COUNTRY - minor rub on the front, removed some plastics/ crash stop. The 2.75" should help until a real suspension lift comes out. I've been talking with KING shocks and they have something in the works for the LC250

 

[Budsterw]

Looks like KING is out

'24+ Toyota LC250/Lexus GX550 Complete King Shock Package

Key Features 100% bolt-on performance! Increased wheel travel! Adjustable ride height. (Front Only) New O.D. End Cap design with high strength stainless steel mounting pin. (Rear Only) Large 2.5” shock bodies increase fluid capacity for smoother, cooler running shocks. Factory tuned for optimal...

sdhqoffroad.com

 

[Ayork]

Looks like KING is out

'24+ Toyota LC250/Lexus GX550 Complete King Shock Package

Key Features 100% bolt-on performance! Increased wheel travel! Adjustable ride height. (Front Only) New O.D. End Cap design with high strength stainless steel mounting pin. (Rear Only) Large 2.5” shock bodies increase fluid capacity for smoother, cooler running shocks. Factory tuned for optimal...

sdhqoffroad.com

Spoke to them on the phone. It’ll give you about an inch and a half of extra height. Essentially a coilover leveling kit.

 

[GrahamM32]

Post Westcott - Still minor rub on tight turns into parking spots. Will need the +35 offset Method's to get the right sweep angle

 

[hosscat]

Post Westcott - Still minor rub on tight turns into parking spots. Will need the +35 offset Method's to get the right sweep angle

Looks great

Post Westcott: Level or slightly tilted to the front? Can’t tell from pic. Thanks man

 

[LCAstro]

These are the 35X12.5R-17 TOYO OPEN COUNTRY - minor rub on the front, removed some plastics/ crash stop. The 2.75" should help until a real suspension lift comes out. I've been talking with KING shocks and they have something in the works for the LC250

Are those the Open Country RT tires? If so how is the road noise increase compared to stock?

 

[GrahamM32]

These are the open country AT 3’s. Honestly not that much noise increase compared to stock.

 

[bwzibell]

Post Westcott - Still minor rub on tight turns into parking spots. Will need the +35 offset Method's to get the right sweep angle

Looks amazing! I have ordered my westcott collar a week ago and just waiting...I am going to (TRY) to fit 285/70R18 Toyo Open Country AT III on stock wheels, haven't seen anything above 275/70R18 however. But I like the tires, seem way more smooth of a ride on highways than Falken Wildpeaks and lighter, nice set up!

 

[GrahamM32]

post window tint.

 

[GrahamM32]

Swapped to the +35 offset methods. No rub

King Suspension package inbound.
Baja Designs light bar ordered.

Looking to swap out stock step for a solid set of rock sliders with no kickout.

 

[shwazz714]

+35 methods look really good imo

 

[Wutangz_Cruiser]

Swapped to the +35 offset methods. No rub

King Suspension package inbound.
Baja Designs light bar ordered.

Looking to swap out stock step for a solid set of rock sliders with no kickout.

Westcott is apparently releasing some without a kickout soon. Jeff said as much in a recent YouTube build video on the LC. I believe the underground one they just built and put up on YouTube. It didn't have the no kickout sliders on it, but he mentioned they were coming, IIRC.

 

[LCdad]

Swapped to the +35 offset methods. No rub

King Suspension package inbound.
Baja Designs light bar ordered.

Looking to swap out stock step for a solid set of rock sliders with no kickout.

Awesome. What was the offset before you swapped to +35?

 

[GrahamM32]

It was the same wheel in a zero offset - would need to trim to get them to fit

 

[LCdad]

It was the same wheel in a zero offset - would need to trim to get them to fit

Thanks for the quick reply! Yeah 0 offset is super aggressive.

 

[navindralr]

can you link where you got the kings suspension? I'm looking for a suspension set up as well. thanks.

 

[GrahamM32]

King Shocks

kingshocks.com