Roof rack setups

I am not sure I agree with that logic of storage and setup , I am thinking that it takes up the roof rack got to haul a ladder to get in and out and in the middle of night if you gotta go its an acrobatic maneuver to get to ground .
The animal part ?
I can literally go from the driver's seat to being in a comfortable bed in 5 minutes and it takes only about 10 to get back on the road. That's a big plus for me on road trips.

As with others, I like the reduced worry of animals. It's not perfect, but it provides some peace of mind and sounder sleep for me.

Different strokes for different folks and different gear for different jobs. I use a ground tent too, when that's a better fit.

- C
 
Widdle Wadder reporting for duty 🫡
 

Attachments

  • tempImagef12qbd.png
    tempImagef12qbd.png
    2.2 MB · Views: 156
  • IMG_6191.jpg
    IMG_6191.jpg
    608.9 KB · Views: 119
  • IMG_6189.jpg
    IMG_6189.jpg
    642.1 KB · Views: 123
I put on the Westcott rack on mine. Drove down to North county San Diego and saw 26.2 mpg on the way down, 24.3 on the way back. I didn't realize that going South was downhill, haha!
 

Attachments

  • DSC_0720.jpeg
    DSC_0720.jpeg
    561.9 KB · Views: 133
Widdle Wadder reporting for duty 🫡
Thanks for sharing who makes that ladder. It looks like one of the few (maybe only?) back ladders for the LC that still allows the rear hatch window to be used. Also having flat steps is good--I don't care for round ladder rungs. Toyota should have given us a sliding rear window like the 4Runner, in my opinion. Now let's see some Rotopax attachment solutions that fit on the factory FE roof rack, such as Molle panels, that won't interfere with awnings, etc.

BTW, I was able to move my Ironman "quick-release" setup for two ARB awnings from my previous 4R TDR Pro with the tubular rack over to the LC but had to have custom mounting brackets made and installed. Here are a few initial photos.
 

Attachments

  • IMG_3304.jpeg
    IMG_3304.jpeg
    124.2 KB · Views: 102
  • IMG_3305.jpeg
    IMG_3305.jpeg
    174.3 KB · Views: 79
  • IMG_3306.jpeg
    IMG_3306.jpeg
    185.6 KB · Views: 79
  • IMG_3307.jpeg
    IMG_3307.jpeg
    264.6 KB · Views: 88
Last edited:

Lexus GX 550 (2024) Roof Rack - PT97060244​


I am assuming this will fit the 2024 LC 250?
 

Attachments

  • GX 550 ROOF RACK.JPG
    GX 550 ROOF RACK.JPG
    31.3 KB · Views: 66
Today I installed the Victory 4X4 Evolution 3/4 roof rack. Really impressed with the quality. Pretty easy to install (with a second person to help). Going to install some side and rear lights on the roof rack next.
 

Attachments

  • tempImaget8Qgkn.png
    tempImaget8Qgkn.png
    3.2 MB · Views: 58
  • tempImageFkOYOD.png
    tempImageFkOYOD.png
    3.6 MB · Views: 61
  • tempImageSDfp3H.png
    tempImageSDfp3H.png
    3.2 MB · Views: 71

Lexus GX 550 (2024) Roof Rack - PT97060244​


I am assuming this will fit the 2024 LC 250?
The GX550 has different roof rails for the Overtrail and non-Overtrail versions. Only the Overtail has the same rails as the Landcruiser. You need to get the Overtail roof rack (PT97060243) to put on a Landcruiser.

 
The GX550 has different roof rails for the Overtrail and non-Overtrail versions. Only the Overtail has the same rails as the Landcruiser. You need to get the Overtail roof rack (PT97060243) to put on a Landcruiser.

Thank you.
 
How did you mount the ikamper without raised mounting brackets or raised crossbars? Thanks
Loosened the side rails to start threading the bolts and then just used extension (DEWALT Magnetic Screwdriving Bit Holder Individual) to tighten them.
 
Thanks for response and explaining your way. It is low profile but harder to put in and remove.
I always take off the RTT right after trip, so I will use the raised mounting brackets/crossbar to have more room (hand reaching) to install.
 
Back
Top