Nashfabco - New Ditch Light Brackets & Rear Half Ladder

[LouNYC]

It looks like these just dropped on their site. I just ordered the ditch light brackets. The half ladder looks cool, especially for the price.

Toyota Land Cruiser/Prado 250 2024 Rear Half Ladder | NashFabCo

All new Aluminum construction! The Aluminum Construction Makes it a rust free Product!!If adding RotoPax Bracket it possible might trip rear collision sensor and apply the breaks! Now available in 14 Colors! Color Samples in photos Above, No Charge for Standard Black. Driver side available for...

www.nashfabco.com

Toyota Land Cruiser/Prado 250 2024 Ditch Light Plates | NashFabCo

2 Week lead time before ship out! Sold as a Pair! (2) Replaces the oem plastic hood pieces with an attachment point for Accessories! The Aluminum Construction Makes it a rust free Product!! -Made from 14ga Aluminum to prevent Rust and keep it light weight!-cnc cut-Perfect fit that flows with...

www.nashfabco.com

 

[sothea]

That Half Ladder is a really interesting design! I wonder how you can pull yourself up if you had a rooftop tent? Or maybe the spoiler wouldn't allow that anyway?

 

[pnwlandcruiser_]

Hey! That LC sure looks familiar

 

[luanta]

love the ditch light brackets

 

[solidbrix]

I ordered the ladder, will report on it soon haha

 

[kerner]

Thinking that ladder will be a great way to strap on a trash bag without a swing out.

 

[cmpugh7]

Ditch light brackets ordered! Thank you for this. I was dreading taking the time to install Westcott’s.

 

[b407driver]

Thinking that ladder will be a great way to strap on a trash bag without a swing out.

Wonder how a full bag'o'trash would affect the lift gate power?

 

[kerner]

Wonder how a full bag'o'trash would affect the lift gate power?

We carry a trashcan inside the trash bag - I'd want to pull it before opening the full hatch to avoid dumping garbage.

 

[slowTLC250]

It looks like these just dropped on their site. I just ordered the ditch light brackets. The half ladder looks cool, especially for the price.

Toyota Land Cruiser/Prado 250 2024 Rear Half Ladder | NashFabCo

All new Aluminum construction! The Aluminum Construction Makes it a rust free Product!!If adding RotoPax Bracket it possible might trip rear collision sensor and apply the breaks! Now available in 14 Colors! Color Samples in photos Above, No Charge for Standard Black. Driver side available for...

www.nashfabco.com

Toyota Land Cruiser/Prado 250 2024 Ditch Light Plates | NashFabCo

2 Week lead time before ship out! Sold as a Pair! (2) Replaces the oem plastic hood pieces with an attachment point for Accessories! The Aluminum Construction Makes it a rust free Product!! -Made from 14ga Aluminum to prevent Rust and keep it light weight!-cnc cut-Perfect fit that flows with...

www.nashfabco.com

Love the ditch light mounts. Can you share what the visibility is like from the driver's seat?

 

[LouNYC]

Love the ditch light mounts. Can you share what the visibility is like from the driver's seat?

Will do. I haven't received them yet.

 

[czekchik]

It looks like these just dropped on their site. I just ordered the ditch light brackets. The half ladder looks cool, especially for the price.

Toyota Land Cruiser/Prado 250 2024 Rear Half Ladder | NashFabCo

All new Aluminum construction! The Aluminum Construction Makes it a rust free Product!!If adding RotoPax Bracket it possible might trip rear collision sensor and apply the breaks! Now available in 14 Colors! Color Samples in photos Above, No Charge for Standard Black. Driver side available for...

www.nashfabco.com

Toyota Land Cruiser/Prado 250 2024 Ditch Light Plates | NashFabCo

2 Week lead time before ship out! Sold as a Pair! (2) Replaces the oem plastic hood pieces with an attachment point for Accessories! The Aluminum Construction Makes it a rust free Product!! -Made from 14ga Aluminum to prevent Rust and keep it light weight!-cnc cut-Perfect fit that flows with...

www.nashfabco.com

fyi. i just got the ditch light brackets and it doesn't fit and in fact the little slide in tab broke off. the tab where you supposed to screw the oem screw is not even aligned with the hole and it s about 1/4 inch too high. from the hole. no instructions either and lead time was over two weeks.

 

[ZeaStardust]

fyi. i just got the ditch light brackets and it doesn't fit and in fact the little slide in tab broke off. the tab where you supposed to screw the oem screw is not even aligned with the hole and it s about 1/4 inch too high. from the hole. no instructions either and lead time was over two weeks.

That's disappointing. Have you contacted NashFabCo?

 

[czekchik]

That's disappointing. Have you contacted NashFabCo?

I did both on insta and by email. they did reply on insta within 24 hours and said when installed properly they fit perfect. i told them no instruction were included and they apologized and asked for few pics. they will be sending me replacement of the broken one and include instruction. hopefully it will work

 

[ZeaStardust]

Let us know how it goes. Good luck!

 

[dtxlcfe]

I did both on insta and by email. they did reply on insta within 24 hours and said when installed properly they fit perfect. i told them no instruction were included and they apologized and asked for few pics. they will be sending me replacement of the broken one and include instruction. hopefully it will work

Mine installed just fine. I did talk to the guy because instructions were lacking. He is super nice.

 

[LouNYC]

Which switch panel are you guys using? I have the auxbeam 6 gang, baja designs pods and ditch brackets ready to install but not confident enough to install the auxbeam system myself.

 

[cmpugh7]

Which switch panel are you guys using? I have the auxbeam 6 gang, baja designs pods and ditch brackets ready to install but not confident enough to install the auxbeam system myself.

Garmin wireless. Integrates with Apple CarPlay, and comes up on the main screen to turn lights on and off. Could use your phone too. Been flawless so far, and super simple install. It's not without it's drawbacks, but the pros far outweighed the cons in my case.

 

[dtxlcfe]

Which switch panel are you guys using? I have the auxbeam 6 gang, baja designs pods and ditch brackets ready to install but not confident enough to install the auxbeam system myself.

I am trying to only use factory blank locations for my aux light switches and plug in the caliraised cube switches in those blanks. So an Auxbeam or anything like that wont work for this. So i am trying to figure out a way to do it with this: True Mods 12V Auto Waterproof Fuse 5-Pin Relay Box. Still brainstorming on how its going to work though.

 

[ZeaStardust]

I am trying to only use factory blank locations for my aux light switches and plug in the caliraised cube switches in those blanks. So an Auxbeam or anything like that wont work for this. So i am trying to figure out a way to do it with this: True Mods 12V Auto Waterproof Fuse 5-Pin Relay Box. Still brainstorming on how its going to work though.

Let us know how it goes with the Relay Box.

I placed an order for square cube switches from Cali. I also ordered 2024 2025 Toyota Landcruiser 250 Auxiliary Upfitter Switch Panel Stock Look off of eBay.