Installation of Roam Rugged Case on First Edition Roof Rack

[PixelMagic]

Thought I would share this in case it helps someone thinking of this product.

Installation of 95L Roam Rugged case on First Edition Roof Rack using the 95L Roam Rugged Mounts.

• The First Edition Roof Rack needs 5/16" carriage bolts: the Roam carriage bolts are too small for the T rails.
  • Use 5/16" diameter by 3/4" long carriage bolts. If the bolt is too long, it will hit the bottom of the case.
  • 
    
    
• The Roam Rugged Mount slots are just under a mm too tight for the proper sized carriage bolt, but it is easy to widen slightly with a Dremel. Be sure to Dremel enough to let the bolt screws pass easily.
  • These pictures show where to widen to accommodate the bolts for the Front and Back Mounts.

Front

Back

• For the back, use a Torx wrench to move one of the cross bars to the back.

Very secure and lockable clamp mechanism at either end.

 

[RBB]

Thank you

 

[DaveTravel]

Nice set-up. Thanks. Now all we need is a nice functional (flat steps/rungs) folding ladder that won't eliminate access to the rear window. I wish they'd put a sliding rear window (a-la-4Runner) so a Wescott ladder would work. Hoping some after-market company will develop a good set-up soon.

 

[rand_kuruza]

Thought I would share this in case it helps someone thinking of this product.

Installation of 95L Roam Rugged case on First Edition Roof Rack using the 95L Roam Rugged Mounts.

• The First Edition Roof Rack needs 5/16" carriage bolts: the Roam carriage bolts are too small for the T rails.
  • Use 5/16" diameter by 3/4" long carriage bolts. If the bolt is too long, it will hit the bottom of the case.
  • 
    View attachment 7242
• The Roam Rugged Mount slots are just under a mm too tight for the proper sized carriage bolt, but it is easy to widen slightly with a Dremel. Be sure to Dremel enough to let the bolt screws pass easily.
  • These pictures show where to widen to accommodate the bolts for the Front and Back Mounts.

Front
View attachment 7244

Back
View attachment 7246

• For the back, use a Torx wrench to move one of the cross bars to the back.

Very secure and lockable clamp mechanism at either end.

View attachment 7251

View attachment 7252

View attachment 7256

View attachment 7257

Tire specs and name please. Any rubbing when off-roading?