High Offset Wheels (>=than 40mm)

the usarian · Tuesday at 12:01 PM

Hey all thought we could have a thread that listed the high offset wheels (>=40mm) that would fit with stock suspension so as more manufactures produce wheels others can refer to the list.

From my knowledge the two that are advertising 18 inch wheels equal to or greater than +40mm offset are:

Method 708 HD ($379) Not available yet.
Icon Alloys Recon SLX ($225.71) Available now.

LouNYC · Tuesday at 12:57 PM

Method 318 ($250) Back ordered (18x8.5, 6x5.5, +40mm)

ShakyHandJeff · Tuesday at 5:21 PM

First, let me qualify this by saying I'm a complete Newbie to this.
Wouldn't these TRD wheels work? (+45mm)

TRD 18-In. Flat Black Alloy Wheel

Screen Shot 2024-11-12 at 3.20.01 PM.png

LCOceans · Tuesday at 9:22 PM

Newbie here too. Are we saying at +40mm offset, the tire will be in the same position as it is stock? Basically tucked in the wheel well?
I thought stock was +60mm. Perhaps +40 is so close it would look nearly the same as stock?
I see a lot at +25mm......would this make the tire stick out a bit and widen the stance?

ShakyHandJeff · Tuesday at 10:32 PM

LCOceans said:
Newbie here too. Are we saying at +40mm offset, the tire will be in the same position as it is stock? Basically tucked in the wheel well?
I thought stock was +60mm. Perhaps +40 is so close it would look nearly the same as stock?
I see a lot at +25mm......would this make the tire stick out a bit and widen the stance?

I believe stock wheel (at least for First Edition) is +65. So, a +45 would have the wheel stick out an additional 0.78 inches. A +25 would stick out 1.57 inches from the stock wheel position.

trek805 · Tuesday at 10:45 PM

Im picking up a set of 2024 trd tacoma wheels like shown in previous post above that are matt black and plus 45 offset tomorrow. We will see. Im putting them with my 285 70 18 toyo at3's. Im replacing my KMC's that are plus 18 offset. I dont like how far they poke out and im getting rubbing even with crash plates removed up front and mudflaps gone. Dont ever go plus 18 or zero offset. Bad idea with large tires

ShakyHandJeff · Tuesday at 10:50 PM

trek805 said:
Im picking up a set of 2024 trd tacoma wheels like shown in previous post above that are matt black and plus 45 offset tomorrow. We will see. Im puting them with my 285 70 18 toyo at3's. Im replacing my KMC's that are plus 18 offset. I dont like how far they poke out and im getting rubbing even with crash plates removed up front and mudflaps gone. Dont ever go plus 18 or zero offset. Bad idea with large tires

Post pics. I'm really interested in seeing how it turns out. Your planned setup is what I was planning.

trek805 · Tuesday at 10:50 PM

Ill post pics once I get them swapped this week.

mkg · Wednesday at 9:35 AM

Granted they are more expensive and a bit tougher to come by, Bradley Vs come in a +50 offset.

b407driver · Wednesday at 9:49 AM

trek805 said:
Im picking up a set of 2024 trd tacoma wheels like shown in previous post above that are matt black and plus 45 offset tomorrow. We will see. Im putting them with my 285 70 18 toyo at3's. Im replacing my KMC's that are plus 18 offset. I dont like how far they poke out and im getting rubbing even with crash plates removed up front and mudflaps gone. Dont ever go plus 18 or zero offset. Bad idea with large tires

That's the exact combo I have, and it works perfectly. No rubbing whatsoever, crash plates retained (yes, full compression/turning, front and rear), might poke out maybe <1/2" more than stock, but unnoticeable. It's a great combo for people who don't want to overpay for the Tundra/Sequoia TRD Pro BBS wheels, and they are basically the same weight (28.7 lbs if I recall correctly). ~$200+/wheel and done.

LouNYC · Wednesday at 10:16 AM

Do the 2024 Tacoma or Tundra wheels come in 18"? With 45mm offset?

Might go this route.

Markarian421 · Wednesday at 11:09 AM

Factory offsets are 70 or 60. The wheels for the nearly identical Lexus GX550 are 50. Icon has a video where they test different offsets for 18" wheels and concluded that of their wheels (vs. stock), 40 was the best offset for upsizing tires, if they pushed out beyond that (to their 25 offset wheel) it would hit the fender, stick out and spray mud/gravel down the side, etc.

Here's my list of wheels that are likely to work (from the spreadsheet linked in my signature), I don't have part numbers for all of them. There may be more Toyota wheels that work. If I end up with a Land Cruiser with 20" wheels, I'll get a set of the Tacoma wheels. The Sequoia wheel below is also a popular choice if you can get them cheap. If you know of more, let me know.

MFG	Name	PN	Dia (in)	Width (in)	Offset (mm)	Center bore (mm)	Poke (mm)	Delta (mm)	Delta (in)	Inset (mm)	Delta (mm)	Weight (lbs)	MSRP
Toyota	Stock 1958 trim	?	18	7	70	95.1						32	?
Toyota	Stock LC/FE trim	42611-60M70 (Gray) ?	18	7.5	60	95.1	35.3	0	0	155.3	0	27.3-31	?
Toyota	Upgrade 20" wheel	?	20	7.5	60	95.1						37.2-40	?
Lexus	GX550 Overtrail Wheel	?	18	7.5	50	95.1	45.3	10	0.39	145.3	-10	27-28	?
Toyota	Sequoia TRD wheel	PT960-34220-2F	18	8.5	47.5	95.1	61	25.7	1.01	155	-0.3	27-28.7	1120
Toyota	Tacoma TRD wheel	PTR56-35242-F1	18	8	45	95.1	56.6	21.3	0.84	146.6	-8.7	28-28.75	300
Icon	RECON SLX	?	18	9	40	95.1	74.3	39	1.54	154.3	-1	36	340
Rays	D108	38138855216BZZ	18	8.5	52	112	56	20.7	0.81	160	4.7	?	?
Rays	07X	10178803816BD	18	8	38	112	63.6	28.3	1.11	139.6	-15.7	?	?
Rays	07X	10178854416BD	18	8.5	44	112	64	28.7	1.13	152	-3.3	?	?
Rays	07X Limited	10218854416PH	18	8.5	44	112	64	28.7	1.13	152	-3.3	?	?
Method	318	MR318885601340	18	8.5	40	106.25	68	32.7	1.29	148	-7.3	29.7	299
Method	319	MR319885601340	18	8.5	40	106.25	68	32.7	1.29	148	-7.3	31.6	319
Bradley Forged	Takumi	?	18	8.5	52	110.3	56	20.7	0.81	114.3	-41	?	?
Bradley Forged	Takumi	?	18	8.5	40	110.3	68	32.7	1.29	114.3	-41	?	?

Markarian421 · Wednesday at 12:20 PM

ShakyHandJeff said:
First, let me qualify this by saying I'm a complete Newbie to this.
Wouldn't these TRD wheels work? (+45mm)

TRD 18-In. Flat Black Alloy Wheel

View attachment 19058

In addition to @b407driver's photos, see:

Issues with new TMPS in second wheel set

Or any of the Driving Sports videos featuring that Land Cruiser:

trek805 · Wednesday at 1:23 PM

Picked em up today.... gonna install this week on my 285's

trek805 · Wednesday at 1:24 PM

b407driver said:
That's the exact combo I have, and it works perfectly. No rubbing whatsoever, crash plates retained (yes, full compression/turning, front and rear), might poke out maybe <1/2" more than stock, but unnoticeable. It's a great combo for people who don't want to overpay for the Tundra/Sequoia TRD Pro BBS wheels, and they are basically the same weight (28.7 lbs if I recall correctly). ~$200+/wheel and done.

View attachment 19088 View attachment 19089 View attachment 19092

cool. Im gonna put my crash plates back on, now that you have confirmed.. Thanks

It should look good with my Westcott lift

D-mac · Wednesday at 7:35 PM

The JDM wheel thread i started a while back has some more of these like Rays Gram Lights 57DR-X , Volk Racing TE37 SB and Large PCD, JAOS Tribecross and more are on the way.

trek805 · 2024-11-14T09:21:55-0600

Here you go. 285 70 18 Toyo AT3's, Westcott lift, 2024 Tacoma TRD wheels Plus 45 offset.... I think this is best set up ever. 45 offset is perfect as mentioned from other members. A little poke, no more rubbing like I had with the KMC's plus 18 offset. I'm 100% satisfied.

Markarian421 · 2024-11-14T15:08:43-0600

D-mac said:
The JDM wheel thread i started a while back has some more of these like Rays Gram Lights 57DR-X , Volk Racing TE37 SB and Large PCD, JAOS Tribecross and more are on the way.

Thanks, added those.

mkg · 2024-11-14T15:12:19-0600

Bradley also offers the V in a high offset wheel.
Size
18×8.5J

Hole ／ P.C.D.6/139.7
Inset55
Hub diameter (Φ)110

BRADLEY V A masterpiece that transcends time and continues from 'Bradley 01'.

www.4x4es.co.jp

Stage7 · 2024-11-14T15:12:51-0600

I finally received my Method 319 +40 offset wheels with 275/70R18 SL load tires, albeit they lost my 5th wheel (either FedEx lost it or Method lost it) that I paid for so I only have four and they discontinued them for some reason so I'm not sure if I'm going to keep them or find something else that fits the bill and have 5 wheels. I'm a little bummed that I only have four and that I can't rotate the spare into the rotation mix to make the tires last longer but it is what it is.

High Offset Wheels (>=than 40mm)

New member

Active member

New member

Active member

New member

Active member

New member

Active member

Well-known member

Well-known member

Active member

Well-known member

Well-known member

Active member

Attachments

Active member

Member

Active member

Attachments

Well-known member

Well-known member

Active member

Attachments

Similar threads