Wheel upgrades

Markarian421 · Jun 25, 2024

mkg said:
Here is a link to the fitment of another 17" wheel.. offset doesn't work but clearance looks ok with the limited angle

2024 Land Cruiser smallest wheel

Well, I think I may be the first to officially mount 17s on the LC 250: Wheel: fifteen52 Offroad - Analog HD - 17x8 +25 Tire: Falken Rubitrek AT 285/70/R17 (approx. 32.8in) Got them installed at my Toyota dealer. They had no concerns of tight fit. Balance weights cleared. No rub. Pretty close...

www.landcruiserforum.com

Yeah it looks like a 17" wheel will go on there, but I wouldn't want to drive it on a gravel road with only ~5mm from the calipers to the inside of the wheel.

Trailman · Jun 25, 2024

Crude mockup of what it would look like to powder coat the factory 18” wheels with K03’s to match the roof. Original photo credit from Cecil Graves on the FB group.

AZdogs · Jun 25, 2024

Trailman said:
Crude mockup of what it would look like to powder coat the factory 18” wheels with K03’s to match the roof. Original photo credit from Cecil Graves on the FB group.
View attachment 3423 View attachment 3424

Do you know if painting those wheels will hold up over time?

Trailman · Jun 25, 2024

AZdogs said:
Do you know if painting those wheels will hold up over time?

Not my area of expertise. Don’t even know what it would cost compared to just buying different wheels. Would depend on how good of a job the shop does that preps and powder coats the them. I kind of like the matching look but silver similar to what TRD Jon put on his blue would probably look similar

Draper · Jun 25, 2024

Markarian421 said:
Ok, I asked Method about brake caliper clearance with their 17" wheels. The only wheel they have their own numbers for is the 707 17" with 25 offset, and they say it clears the caliper by 5.6 mm (or about 7/32", less than a quarter inch). (!!!) The 703 and 705 with 35 offset they say they don't know and are just going with Wescott Design's fit test, but there's no reason to think it would be significantly different. That is way too close for comfort for me, I'll be sticking to 18" wheels.

Westcott seems to be putting the 703s on all the Land Cruisers they are doing. I sent them a note on IG and this is what I got back.

I don’t have the exact measurement but it has enough to clear the wheel weights. We had done at least 20 of them with the 17x8.5 methods and no problem

I'm going to test fit the 703s I have here before mounting tires to see what I think of the clearance, but I'm thinking it will probably be fine.

coryten · Jun 26, 2024

Trailman said:
Not my area of expertise. Don’t even know what it would cost compared to just buying different wheels. Would depend on how good of a job the shop does that preps and powder coats the them. I kind of like the matching look but silver similar to what TRD Jon put on his blue would probably look similar

I'm starting to buy into the machined silver look that TRD Jon has as a possible pairing for a Trail Dust rig. Otherwise will probably just stick with black to match the trim.

bobs619 · Jun 26, 2024

I have these sitting in the garage Just waiting for an allocation….

Markarian421 · Jun 26, 2024

Draper said:
I'm going to test fit the 703s I have here before mounting tires to see what I think of the clearance, but I'm thinking it will probably be fine.

If you can get pictures and possibly measurements from inside the wheel that would help a lot of us decide!

Draper · Jun 26, 2024

Markarian421 said:
If you can get pictures and possibly measurements from inside the wheel that would help a lot of us decide!

For sure! My LC cleared QC last week so hopefully I’ll have it in a week or two.

Markarian421 · Jul 1, 2024

traildustLC250 said:
Does anyone know the weight of the stock wheel without the tire? LC grade or FE (not 1958)

I was just trying to find this myself. For the stock mid-grade 18" wheel, the Car and Driver flex test video put wheel + tire at 65.0 lbs. Michelin says those are 37.7 lb tires which would make the wheels about 27.3 lbs.

I'm wondering if anyone has weighed the 20" upgrade wheels?

bobs619 · Jul 3, 2024

Test fitted the TE37 to the front. There’s minimal poke and no rubbing at full lock.

Waiting on new tpms to mount the whole set. To be continued…

Spec: 18x9 0 offset, 275/65 KO2

EOD Guy · Jul 4, 2024

I like the amount of poke!

coryten · Jul 4, 2024

bobs619 said:
Test fitted the TE37 to the front. There’s minimal poke and no rubbing at full lock.

Waiting on new tpms to mount the whole set. To be continued…

Spec: 18x9 0 offset, 275/65 KO2

My goodness the wheel wells on these vehicles gobble up these 32"s. With a lift I fear my 33's will look tiny!

Draper · Jul 4, 2024

bobs619 said:
Test fitted the TE37 to the front. There’s minimal poke and no rubbing at full lock.

Waiting on new tpms to mount the whole set. To be continued…

Spec: 18x9 0 offset, 275/65 KO2

Love the TE37s!

In most cases a zero offset wheel would be pretty aggressive, but paired with a 275 tire it seems to work well. If you were to throw something like a 35 x 12.5 tire on there it would have another inch or so of poke. Just something to consider for those weighing wheel options.

ultane · Jul 4, 2024

Draper said:
Best thing to do is ceramic coat them before having tires installed. I've done this on my last 3 cars and it makes a world of difference!

Who and where do I get the wheels ceramic coated?

coryten · Jul 5, 2024

ultane said:
Who and where do I get the wheels ceramic coated?

Yelp is your friend, friend.

Draper · Jul 5, 2024

It’s usually $50-75 per wheel to get them coated at a detailer.

If the wheels are new and not mounted it’s a pretty easy DIY. Just pick up a bottle of Gyeon Rim EVO off Amazon. A single bottle will be enough to do 2 sets.

If the tires are already mounted you just want to make sure the wheels are super clean first.

Honeybadger · Jul 8, 2024

Draper said:
Westcott seems to be putting the 703s on all the Land Cruisers they are doing. I sent them a note on IG and this is what I got back.

I'm going to test fit the 703s I have here before mounting tires to see what I think of the clearance, but I'm thinking it will probably be fine.

View attachment 3422

Interested in what you find out as the 703's are what I'm looking at as well!

OsageCowboy · Jul 10, 2024

bobs619 said:
Test fitted the TE37 to the front. There’s minimal poke and no rubbing at full lock.

Waiting on new tpms to mount the whole set. To be continued…

Spec: 18x9 0 offset, 275/65 KO2

This is the best look I have seen yet. Did you finish the install? Generally, will any 18x9 wheel with 0 offset and 275/65/18 offroad tires have this stance? Kind of a newbie on the wheel/tire offset combination game. Another question is whether the 275/65/18 KO2 or KO3 will fit in the spare compartment. I appreciate all of the insights here!

coryten · Jul 10, 2024

OsageCowboy said:
This is the best look I have seen yet. Did you finish the install? Generally, will any 18x9 wheel with 0 offset and 275/65/18 offroad tires have this stance? Kind of a newbie on the wheel/tire offset combination game. Another question is whether the 275/65/18 KO2 or KO3 will fit in the spare compartment. I appreciate all of the insights here!

Personally too much poke for me. It's been mentioned that +35-40 offset seems to be ideal for a flush look and minimal rubbing. Sadly there are very few 18" wheels in this offset. Method 703's (17in) in +35 are shown to fit perfectly, which is why they are mentioned here frequently. Up to 33" tires have been shown to fit in the spare location.

Wheel upgrades

Well-known member

Well-known member

New member

Well-known member

Active member

Active member

Active member

Well-known member

Active member

Well-known member

Active member

Attachments

Moderator

Active member

Active member

Well-known member

Active member

Active member

Member

Active member

Active member

Similar threads