When I go into vehicle settings/TPWS and I select " Setting by Specified Pressure" I get the screen that shows "33" as pressure for front tires. The manual states on page 559-560 that this is user adjustable., but I can get it to change using buttons as usual. See paste of manual instructions below. and pics of screens displayed Anyone figure this out yet? Thanks in advance.
1 Start the hybrid system.
The tire inflation pressure cannot
be set while the vehicle is moving.
2 Select on the multi-
information display.
3 Select “Vehicle Settings”.
4 Select “TPWS Setting”.
5 Select “Tyre Pressure Set-
ting”.
6
Maintenance and care560 6-3. Do-it-yourself maintenance
6 Select “Setting by Specified
Pressure” and then select the
desired front and rear tire
pressures.
7 Select “Yes”.
The tire pressure warning light will
slowly blink 3 times.
After setting the tire inflation pres-
sure, a message indicating that set-
ting has been completed will be
displayed on the multi-information
display.
1 Start the hybrid system.
The tire inflation pressure cannot
be set while the vehicle is moving.
2 Select on the multi-
information display.
3 Select “Vehicle Settings”.
4 Select “TPWS Setting”.
5 Select “Tyre Pressure Set-
ting”.
6
Maintenance and care560 6-3. Do-it-yourself maintenance
6 Select “Setting by Specified
Pressure” and then select the
desired front and rear tire
pressures.
7 Select “Yes”.
The tire pressure warning light will
slowly blink 3 times.
After setting the tire inflation pres-
sure, a message indicating that set-
ting has been completed will be
displayed on the multi-information
display.
