🛠️ Member Build Dustin's 1958 Cruiser Build

[PurelyAbrasive]

I got my 1958 LC on Dec. 30th 2024 and I would have to say its one of the better Toyota's I have owned. I have had 7 Toyota's over the years. I plan on doing some simple upgrades but most are going to be to just make it look good as I really don't do to much off-roading except for when I go hunting.

So far have done the following:
265/70-28 Falken Wildpeak A/T4's
20% Tint all the way around
Tailgate Light
Husky Liners Front and Rear Seats
Fitcamx
New wheel center caps

Future Upgrade:
Roof Rack
Ditch Lights
Front Bumper
Light Bar
Upgraded Fog Lights

 

[PurelyAbrasive]

More Mods:
Rear Cargo Side Light
Relay/Fuse Box and wiring
60Amp CB
Power Distribution Blocks
Rago Ditch Light Brackets

 

[PurelyAbrasive]

Future Updates.

 

[PurelyAbrasive]

Future Updates.

 

[PurelyAbrasive]

Future Updates.

 

[PurelyAbrasive]

Future Updates.

 

[PurelyAbrasive]

Future Updates.

 

[deero]

Looks great. Could you share a bit more info about your tailgate light?

 

[PurelyAbrasive]

Looks great. Could you share a bit more info about your tailgate light?

Yep I got it from Obsian 3D. They are high quality 3D printed lights.
Obsian3D

 

[Blkmrkt222]

Did you consider the 275/70/R18 Wildpeaks?
I'm still debating between the 265 and the 275 size.

 

[PurelyAbrasive]

Did you consider the 275/70/R18 Wildpeaks?
I'm still debating between the 265 and the 275 size.

I did but honestly I don’t do any heavy off-roading and the 10 lbs per tire weight difference just didn’t justify me going any bigger. Plus I will probably add 40 lbs of accessories so in the long run it will be a wash. With these I am averaging about 18.6 to 18.7mpg

 

[Ugly Margarita]

Yep I got it from Obsian 3D. They are high quality 3D printed lights.
Obsian3D

on a 1-5 scale, how complicated to install those?

 

[Bappy]

Yep I got it from Obsian 3D. They are high quality 3D printed lights.
Obsian3D

There are no pics on their sight regarding wiring. Does it come with a plug? Where did you wire it in?

 

[PurelyAbrasive]

There are no pics on their sight regarding wiring. Does it come with a plug? Where did you wire it in?

I got the one without the wiring kit because I had already installed a light there but I liked this one. You can message Obisan3D on here and he will answer your question regarding wiring.

 

[PurelyAbrasive]

on a 1-5 scale, how complicated to install those?

It might be a 3 as you do have to feed a wire through an existing rubber boot in the top of the rear hatch. I got one of these and he helped a lot with not having to take both ends of the boot off. You just have to be patient when working it through. Here is a video of how the wire is ran. The light is not the same but its the same process for this one.
Light Video
Wire Snake

 

[xiaan]

More Mods:
Rear Cargo Side Light
Relay/Fuse Box
60Amp CB
Power Distribution Blocks

@Obisan3D These rear cargo side lights with the dual white/amber aren't available on your web site, are they available to order some other way?