Can you post a few photos of the mounting location. Thx.
🛠️ What Have You Done To Your LC250 Today?
- Thread starter pnwlandcruiser_
- Start date
- Jun 8, 2024
- 295
- Media
- 30
- 458
- Vehicles
- 2007 Toyota Tundra 4X4 Double Cab 5.7L V8, 2015 Chevrolet SS LS3 V8
I performed an oil and filter change at 1200 miles, and while it was all apart under the vehicle hosed it down with a bunch of Amsoil MPHD undercoating to inhibit corrosion from road salts this winter. Took about 3.5 cans.
Then discovered a screw in the drivers side front tire.
Marked it with a paint pen, I will get it fixed later this week.
Then discovered a screw in the drivers side front tire.
Marked it with a paint pen, I will get it fixed later this week.
- Jun 8, 2024
- 295
- Media
- 30
- 458
- Vehicles
- 2007 Toyota Tundra 4X4 Double Cab 5.7L V8, 2015 Chevrolet SS LS3 V8
I’m pretty sure it’s just cosmoline with some other chemicals and an aerosolized thinner to allow it to spray. I didn’t know how much it would take so I ordered 12 cans.
Guess I have enough for the next 3-4 years LOL.
Guess I have enough for the next 3-4 years LOL.
I had the same when I picked up Miss Daisy July 28, only it was on the outside of the shoulder. They replaced the tire before I left the dealership..
After a lot of grief and cursing, got the goose plate in. Parts missing/incorrectly sized, but got it secured enough. Looks good at least. Not much looking forward to the installation process of the seat delete now though
What did the total package cost?
Including the seat delete?
Yes. Everything.... And did you get both seat deletes or just one side
Both seat deletes+plate system cost 3090. The front base plate side screw holes are missing their threading so I’ll need to wood glue to triangle pieces (fortunately they’re just aesthetic)
The bolts that secure the whole system to the car are definitely incorrectly sized. I think they must have not used metric which seems like a pretty big oversight. Their instruction manual is also wrong on multiple parts (location of 40mm and 60mm bolts is swapped, listed socket size for aforementioned bolts is too small, no mention of removing the T-bolt slider from the main plate, and more)
The actual quality of the parts is good, but the above problems are definitely not reflective of that price point.
Agreed. Thank you
Finally installed the Beat Sonic amp today. A couple panels took awhile to remove, but overall not too bad. Not going to be like the Tesla sound system in my Model 3, but it did improve the sound of JBL system. Overall very happy with the upgrade.
Attachments
Hi everyone-
Next step in mods done today. Installed a Diode Dynamics hitch light. Super easy. Tool in pics was to pop the factory fasteners off the hitch cover. Scan QR code in package and you are all but done. More lights are better for sure. Stay safe.
Next step in mods done today. Installed a Diode Dynamics hitch light. Super easy. Tool in pics was to pop the factory fasteners off the hitch cover. Scan QR code in package and you are all but done. More lights are better for sure. Stay safe.
Attachments
Installed door puddle lights. Easy 2 min installation process per door. Lights have same plug connector as original lights so easiest install I’ve done. Original lights weren’t noticeable. These project a focused image that is easily seen in daylight. Amazon ordered product.
Attachments
- Jun 8, 2024
- 295
- Media
- 30
- 458
- Vehicles
- 2007 Toyota Tundra 4X4 Double Cab 5.7L V8, 2015 Chevrolet SS LS3 V8
I just installed mine this evening.
Pretty easy, and surprisingly effective:
I also took a few moments to rid myself of the terrible iForceMax badge a few days ago.
I finally have better lights for camping and pitch black dark roads in the country and state/national parks. The rear chase/camp lights are awesome for seeing your surroundings when setting up camp and cooking. Also don't want to park on an ant mound or not see a snake. I use a handheld UV light for scorpions.
Auxbeam 800 mounted on a 67 Designs mount. All the lights are Diode Dynamics that have a 8 year warranty. I am waiting for my Nashfab ditch light brackets to arrive and I have another set of Diode lights for that on order. The 2 top cube light buttons will control those (high and low). I need new stickers... the bottom buttons are also high and low for the rear and I have 3 blanks left.
Auxbeam 800 mounted on a 67 Designs mount. All the lights are Diode Dynamics that have a 8 year warranty. I am waiting for my Nashfab ditch light brackets to arrive and I have another set of Diode lights for that on order. The 2 top cube light buttons will control those (high and low). I need new stickers... the bottom buttons are also high and low for the rear and I have 3 blanks left.
Attachments
Similar threads
