2024 LC Toyota Skid Plate Installion

Martinfj250

Martinfj250

New member
📛 Founding Member
Aug 3, 2024
23
Media
4
22
Tulsa, OK
Vehicles
2024 Land Cruiser, 2020 Audi S5, 2007 Porsche 911S
I have a new LC 250 series and ordered the front and transmission Toyota skid plates which arrived yesterday. Anyone installed these themselves? It seems like it should be straight forward but curious to know if there are any recommendations or gotcha's I need to know about.
 
Martinfj250 said:
I have a new LC 250 series and ordered the front and transmission Toyota skid plates which arrived yesterday. Anyone installed these themselves? It seems like it should be straight forward but curious to know if there are any recommendations or gotcha's I need to know about.
Click to expand...
See those directions and this thread: Skid Plate
 
I'm a little confused on the skid plate options. I have an LC trim and would have like to add factory skid protection.

Is there more than one choice? Thought I read that the first edition had special branded plates maybe different from standard ones?

There are two part numbers in that PDF document in the thread. They seem to have Toyota branding on the front. Is that what I need is to order these two part numbers?

1000038774.jpg
 
l00semarble said:
I'm a little confused on the skid plate options. I have an LC trim and would have like to add factory skid protection.

Is there more than one choice? Thought I read that the first edition had special branded plates maybe different from standard ones?

There are two part numbers in that PDF document in the thread. They seem to have Toyota branding on the front. Is that what I need is to order these two part numbers?

View attachment 11321
Click to expand...

That is correct, if you want the full upgraded skid, you want both of those parts. Those are the correct part numbers and they are available from many online parts dealers at a reasonable discount. I believe you could do only the front skid if you wanted, but I'm not sure there is any good reason to do only the one aside from saving $.

These are the same skid plates that come standard on First Edition.
 
Hey thank you for the quick reply. Seems my truck already has a black metal skid plate. Do we know if the part numbers mentioned provide better or more coverage?

I don't want to pay a couple hundred bucks to upgrade from black to silver!
 
Those 2 part numbers are the front (engine) skid plate and the transmission skid plate.
I bought both from a Toyota dealer on ebay at a discount vs. my local dealer who didn't have them in stock and wanted full msrp.
Install is really easy. I've taken the front on and off for an oil change and it's not bad at all. There are two bolt keyholes that let you hang the skid plate in place while you get the rest of the fasteners in/out.

1726155180222.png
 
l00semarble said:
Hey thank you for the quick reply. Seems my truck already has a black metal skid plate. Do we know if the part numbers mentioned provide better or more coverage?

I don't want to pay a couple hundred bucks to upgrade from black to silver!
Click to expand...

The skid plates on there are in three pieces - two of them are thin metal and one is plastic. They also do not go very far back.

The upgraded skids are made from thicker steel, provide additional coverage and go quite a bit further back to the 3rd frame cross member.
 
Here's a shot of the oem short steel front shield and plastic "skid plate". In my opinion, they're meant to protect you from debris on the highway vs. misjudging a rock or high-point on trail or BLM road.
1726178918295.png
 
Very helpful information thanks everybody. What about the part in front of those parts? The part that comes up to the bumper. On my LC trim it’s just plastic. Is there an upgrade for this?
 
Just did this yesterday, initially without the directions (were not included in box), which wasn't optimal re: efficiency. Once I discovered you have to remove the stabilizer disconnect protection plate, it all made more sense!
 
l00semarble said:
Hey thank you for the quick reply. Seems my truck already has a black metal skid plate. Do we know if the part numbers mentioned provide better or more coverage?

I don't want to pay a couple hundred bucks to upgrade from black to silver!
Click to expand...
Here’s a video comparison of the different skid plates
 
I can't seem to find any of the online parts sellers that have a decent discount AND free shipping. I found good pricing with one and went to check and and it was going to add $452 in shipping.

Where did other find free shipping?
 
Go to your local dealer they normally will work with you. And it's next day . In Florida. Good Luck
 
I’ve been able to receive the front skid plate, but still waiting on the transmission rear one. Can the front one be installed alone without the other? I’d like to go ahead and get part of it done if so.. thanks!
 
DctrEvil said:
I’ve been able to receive the front skid plate, but still waiting on the transmission rear one. Can the front one be installed alone without the other? I’d like to go ahead and get part of it done if so.. thanks!
Click to expand...
Yes I believe it can but you’ll have to remove the rear of it to install the transmission skid when it arrives. I think you’ll also have to remove the skid for the sway bar disconnect (if you have it) so that would be unprotected until the rear skid arrives.
 
You must log in or register to reply here.

Similar threads

L
Transmission skid install questions - metal plate/skid on crossmember, did you remove?
Replies
2
Views
568
John in Wi
John in Wi
Esquire
Front License Plate Bracket Install --
2
Replies
28
Views
1K
lc24
lc24
tnb1
Land Cruiser 250 color Underground
Replies
5
Views
2K
tnb1
tnb1
D
💵 For Sale ALL SOLD - Westcott roof rack left for sale. Toyota Skid Plates and Toyota rock rails already sold - Denver area only
2
Replies
22
Views
2K
dastan360
D
P
LC/LC Skid Plates Bolt Locations, Diagram??
Replies
3
Views
214
EOD Guy
EOD Guy

Latest Discussions

Back
Top