Search results

I Like to use a heavy duty Grade 8 Bolt and Nut. "Problem Solved"

Yes that is the jack point.

Any pics. DFW

Frisco TX / DFW Let me know, thanks.

Any update on the performance of these all weather mats. Thanks.

Same here, I ordered and paid. Dealer had to cancel and refund.

Location please. Can you share pics.

Steering wheel too skinny. Had to bump it up with a leather cover.

3M Scotch Extreme mounting tape.

Hello Teebo, thanks for sharing. I just did mine at 1832 miles "HOT" and dammit that oil filter was on very tight. Made a mess. What is the torque spec. for the drain plug? My Tacoma was 30 ftlb for the same 14mm plug.

Thank you, it's a far way back behind the engine, so the jack will have to do some heavy lifting...lol I use a piece of wood also or a heavy rubber block as a lifting pad.

Thank you for the response and picture. But I want to lift from the center and not the chassis lift points. My Tacoma had a lift point in the center under the front deferential. That way you can lift the whole front up and then use 2 jack stands on the chassis.

Hello y'all, anyone used a floor jack as yet. I checked the user manual, but no floor jack point is identified. Only for the bottle jack point. Anyone used the cross beam below? Will be doing a 2K breakin oil change this weekend. Thanks.

There is lots of extra wire on the harness to make the move to the passenger side. Be careful when removing the Overhead Console, you must pull down from the FRONT first (4 plugs) to avoid breaking the 2 tabs on the back side. I will send a picture later. New parts needed - yes, adhesive to...

I have predator steps and would prefer side steps. I'm in the DFW.

I relocate my dashcam from the driver side to passenger side.. way better and still recorded the front view well. My dealership damaged my overhead console and mirror covers during the original dashcam install. The install was rough and horribly done, I had them replaced the dashcam and all the...