🛠️ What Have You Done To Your LC250 Today?

Attached photos are parts of my setups for Overlanding. Some of them were shared in my other posts which you can search for them if you like.

Soon, I will share the completed/entire setups with:
• Rooftop tent (Ikamper mini)
• Hitch-mount spare tire carrier: 33” OK3 tire, extra fuel+water, recovery boards Maxtrax, license plate with light, etc.
• Side panels with extra fuel / water + shovel/ etc.
• All AC lights: rock lights, bumper light bar, ditch lights, front roof spot lights, side lights, chasing lights
• Control panel / switch panel for all AC lights
• ARB side awning
• ARB built-in air compressor
• Drawer system , fridge slider

As a designer and off-road / off-grid camping person, I utilized all available stuffs to customize for my taste / uses.
I learned and did those over years with my Gwagon for same purposes above without much after marker gears manufactured for it. (See my gwagon photos for my previous custom works)
Do you have a link for the molle panels on the rear windows and the roof lights?
 
Toyo open country at3, 265/70R18
IMG_0582.jpeg
 
Attached photos are parts of my setups for Overlanding. Some of them were shared in my other posts which you can search for them if you like.

Soon, I will share the completed/entire setups with:
• Rooftop tent (Ikamper mini)
• Hitch-mount spare tire carrier: 33” OK3 tire, extra fuel+water, recovery boards Maxtrax, license plate with light, etc.
• Side panels with extra fuel / water + shovel/ etc.
• All AC lights: rock lights, bumper light bar, ditch lights, front roof spot lights, side lights, chasing lights
• Control panel / switch panel for all AC lights
• ARB side awning
• ARB built-in air compressor
• Drawer system , fridge slider

As a designer and off-road / off-grid camping person, I utilized all available stuffs to customize for my taste / uses.
I learned and did those over years with my Gwagon for same purposes above without much after marker gears manufactured for it. (See my gwagon photos for my previous custom works)
The Victory side panels fit on FE roof rack without any modification? they told me it would not fit at all. maybe just trying to sell more of their products lol. interested in your roof light mounting solution as well
 
For the molle panels.


I have the same on mine.
Yes. It is the one. However, it is not designed /manufactured for the OEM FE roof rack. Be aware of it.

I did research all the side panels from different companies, and like the design (look and function) of this one. I know it won’t fit the OEM rack per manufacture note, but I took a risk to order it. I believed I can custom make it working ;) and proved it with the photo of final installation. It’s my main point. Just bend it and till use the OEM holes on the rack ;)

Note: I want to keep my FE OEM looks with the roof rack. I love its design, so tried to figure it out with other aftermarket stuffs.
 

Attachments

  • IMG_7856.jpeg
    IMG_7856.jpeg
    543.1 KB · Views: 89
Last edited:
Attached photos are parts of my setups for Overlanding. Some of them were shared in my other posts which you can search for them if you like.

Soon, I will share the completed/entire setups with:
• Rooftop tent (Ikamper mini)
• Hitch-mount spare tire carrier: 33” OK3 tire, extra fuel+water, recovery boards Maxtrax, license plate with light, etc.
• Side panels with extra fuel / water + shovel/ etc.
• All AC lights: rock lights, bumper light bar, ditch lights, front roof spot lights, side lights, chasing lights
• Control panel / switch panel for all AC lights
• ARB side awning
• ARB built-in air compressor
• Drawer system , fridge slider

As a designer and off-road / off-grid camping person, I utilized all available stuffs to customize for my taste / uses.
I learned and did those over years with my Gwagon for same purposes above without much after marker gears manufactured for it. (See my gwagon photos for my previous custom works)
What’s the tire bag on the gwagon
 
The Victory side panels fit on FE roof rack without any modification? they told me it would not fit at all. maybe just trying to sell more of their products lol. interested in your roof light mounting solution as well
It won’t fit unless you modify it! See my other response.
 
Thinking of making it my dirty laundry bag lol, how’s the water proofing?
Last trip to CO Alpine (Enginer Pass, Imogene Pass, etc.), we got whole night rain…the firewoods stored inside seemed okay with a bit moisture but not wet. I think water ran off
It is not TOTALLY water proof!
 
Rust proofing at Carson Undercoating in North Branch, MN. I highly recommend him if you are anywhere near Minnesota, outstanding quality and attention to detail.

View attachment 19628
Did you have the stock tin skid plates (gravel guards) powdercoated?? UNless you did it yourself, you could have used the money to buy proper skids that will actually protect your vehicle....
 
Did you have the stock tin skid plates (gravel guards) powdercoated?? UNless you did it yourself, you could have used the money to buy proper skids that will actually protect your vehicle....
He painted them at no extra cost since it was the first Land Cruiser through his shop. I'm not planning to take this LC on any serious off-roading until the vehicle is much older, so the light-duty skid plates are more than adequate for now.
 
Back
Top